2017 Generac SB/MB500

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Generac
Model
SB/MB500

Overview

Description

Since Generac Bi-Fuel™ generators run primarily on natural gas, which is cheaper than diesel, fuel costs are significantly reduced over the long term. And since every component is manufactured in-house, these generators are EPA-compliant from the factory. With a reduced carbon footprint, these generators help meet businesses achieve their eco-friendly goals.

Features
  • Generator Enclosure: Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
  • Generac Bi-Fuel Engine: Generac's Bi-Fuel generators are fully integrated solutions, not after-market conversions in the field.
  • Industrial Alternator: Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
  • PowerManager Controller: Generac engineers its generator controls with safety and convenience as top priorities.
  • Generator Paralleling: Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine Specifications
  • Make: Perkins
  • EPA Emissions Compliance: Stationary Emergency
  • EPA Emissions Reference: See Emissions Data Sheet
  • Cylinder #: 6
  • Type: In-Line
  • Displacement - L: 15.2 (927.56)
  • Bore - mm (in): 137 (5.39)
  • Stroke - mm (in): 171 (6.73)
  • Compression Ratio: 16.0:1
  • Intake Air Method: Turbocharged/Aftercooled
  • Cylinder Head Type: 4 Valve
  • Piston Type: Aluminum
  • Connecting Rod Type: I-Beam Section
Engine Governing
  • Governor: Electronic Isochronous
  • Frequency Regulation (Steady State): +/- 0.25%
Lubrication System
  • Oil Pump Type: Gear
  • Oil Filter Type: Full Flow
  • Crankcase Capacity - L (qts): 45 (47.55)
Cooling System
  • Cooling System Type: Closed Recovery
  • Water Pump: Centrifugal Type, Belt-Driven
  • Fan Type: Pusher
  • Fan Speed (rpm): 1658
  • Fan Diameter mm (in): 927 (36.5)
  • Coolant Heater Standard Wattage: 1500
  • Coolant Heater Standard Voltage: 120 VAC
Fuel System
  • Fuel Type: Ultra Low Sulfur Diesel #2
  • Fuel Specifications: ASTM
  • Fuel Filtering (microns): Primary 10 - Secondary 2
  • Fuel Injection: Electronic
  • Fuel Pump Type: Engine Driven Gear
  • Injector Type: MEUI
  • Engine Type: Pre-Combustion
  • Fuel Supply Line mm (in): 12.7 (0.5) NPT
  • Fuel Return Line mm (in): 12.7 (0.5) NPT
Engine Electrical System
  • System Voltage: 24 VDC
  • Battery Charging Alternator: 70 Amps at 24V
  • Battery Size: See Battery Index 0161970SBY
  • Battery Group: 8D
  • Battery Voltage: (2) - 12 VDC
  • Ground Polarity: Negative
Alternator Specifications
  • Standard Model: WEG
  • Poles: 4
  • Field Type: Revolving
  • Insulation Class - Rotor: H
  • Insulation Class - Stator: H
  • Total Harmonic Distortion: <3%
  • Telephone Interference Factor (TIF): <50
  • Standard Excitation: Permanent Magnet
  • Bearings: Single Sealed Cartridge
  • Coupling: Direct, Flexible Disc
  • Load Capacity - Standby: 100%
  • Prototype Short Circuit Test: Yes
  • Voltage Regulator Type: Digital
  • Regulation Accuracy (Steady State): ±1.0%
Power Ratings (kW)
  • Three-Phase 120/208 VAC @0.8pf: 500 kW Amps: 1735
  • Three-Phase 120/240 VAC @0.8pf: 500 kW Amps: 1504
  • Three-Phase 277/480 VAC @0.8pf: 500 kW Amps: 752
  • Three-Phase 346/600 VAC @0.8pf: 500 kW Amps: 601

Specs

Engine

Engine Type
Perkins In-line 6
Displacement
15.2 L

Other

AC Output
500 kW

Related Products