2017 Generac SB/MB600

Call for Price


Availability
Brochure
Year
2017
Manufacturer
Generac
Model
SB/MB600

Overview

Description

Generac Bi-Fuel™ generators meet the on-site fuel requirements for emergency systems as referenced in NEC700 and NFPA 110, and they are the only EPA compliant engine right from the factory. Since less diesel is used, they have fewer emissions and a smaller carbon footprint compared to diesel only.

Features
  • Generator Enclosure: Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
  • Generac Bi-Fuel Engine: Generac's Bi-Fuel generators are fully integrated solutions, not after-market conversions in the field.
  • Industrial Alternator: Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
  • PowerManager Controller: Generac engineers its generator controls with safety and convenience as top priorities.
  • Generator Paralleling: Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine Specifications
  • Make: Perkins
  • EPA Emissions Compliance: Stationary Emergency
  • EPA Emissions Reference: See Emissions Data Sheet
  • Cylinder #: 6
  • Type: In-Line
  • Displacement - L: 18.13
  • Bore - mm (in): 145 (5.71)
  • Stroke - mm (in): 183 (7.20)
  • Compression Ratio: 14.5:1
  • Intake Air Method: Turbocharged/Aftercooled
  • Cylinder Head Type: 4 Valve
  • Piston Type: Aluminum
  • Connecting Rod Type: I-Beam Section
Engine Governing
  • Governor: Electronic Isochronous
  • Frequency Regulation (Steady State): +/- 0.25%
Lubrication System
  • Oil Pump Type: Gear
  • Oil Filter Type: Full Flow Cartridge
  • Crankcase Capacity - L (qts): 45 (47.55)
Cooling System
  • Cooling System Type: Closed Recovery
  • Water Pump: Centrifugal Type, Belt-Driven
  • Fan Type: Pusher
  • Fan Speed (rpm): 1439
  • Fan Diameter mm (in): 965 (38)
  • Coolant Heater Standard Wattage: 1500
  • Coolant Heater Standard Voltage: 120 VAC
Fuel System
  • Fuel Type: Ultra Low Sulfur Diesel #2
  • Fuel Specifications: ASTM
  • Fuel Filtering (microns): Primary 10 - Secondary 2
  • Fuel Injection: Electronic
  • Fuel Pump Type: Engine Driven Gear
  • Injector Type: MEUI
  • Engine Type: Pre-Combustion
  • Fuel Supply Line mm (in): 12.7 (0.5) NPT
  • Fuel Return Line mm (in): 12.7 (0.5) NPT
Engine Electrical System
  • System Voltage: 24 VDC
  • Battery Charging Alternator: 70 Amps at 24V
  • Battery Size: See Battery Index 0161970SBY
  • Battery Group: 8D
  • Battery Voltage: (2) - 12 VDC
  • Ground Polarity: Negative
Alternator Specifications
  • Standard Model: WEG
  • Poles: 4
  • Field Type: Revolving
  • Insulation Class - Rotor: H
  • Insulation Class - Stator: H
  • Total Harmonic Distortion: <3%
  • Telephone Interference Factor (TIF): <50
  • Standard Excitation: Permanent Magnet
  • Bearings: Single Sealed Cartridge
  • Coupling: Direct, Flexible Disc
  • Load Capacity - Standby: 100%
  • Prototype Short Circuit Test: Yes
  • Voltage Regulator Type: Digital
  • Regulation Accuracy (Steady State): ±1.0%
Power Ratings (kW)
  • Three-Phase 120/208 VAC @0.8pf: 600 kW Amps: 2081
  • Three-Phase 120/240 VAC @0.8pf: 600 kW Amps: 1804
  • Three-Phase 277/480 VAC @0.8pf: 600 kW Amps: 903
  • Three-Phase 346/600 VAC @0.8pf: 600 kW Amps: 723

Specs

Engine

Engine Type
Perkins In-line 6
Displacement
18.13 L

Other

AC Output
600 kW

Related Products