2017 Honda Power Equipment WSP33

$239.95


Availability
Brochure
Year
2017
Manufacturer
Honda Power Equipment
Model
WSP33

Overview

Description

Key Features
  • 1/3 hp 115V submersible pump
  • Top discharge
  • 40 gal./min capacity
  • Lightweight durable stainless steel casing
  • Automatic non-mercury float switch
  • Rated for continuous use
Features
  • 1/3hp, 115V submersible pump: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
  • 40 gal./min capacity
  • Rated for continuous use: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • Solids handling up to 3/8": Move slurry and dirty liquids without the worry of damaging the pump.
  • Lightweight durable stainless steel casing: The pump won’t rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • Automatic non-mercury float switch: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • Built in thermal reset switch: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 20 foot heavy duty cord
  • Top discharge: Great for applications where space is tight.
  • Operates fully or partially submerged: No need to worry about the water level for the pump!
  • Shielded ball bearings for added durability: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • Efficient air-insulated motor
  • Oil lubricated double mechanical seals: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Specifications
  • Pump Type: Submersible Standard
  • Starting Type: Automatic
  • Casing: Stainless Steel
  • Motor (HP): 1/3
  • Voltage: 115
  • Starting amps: 10
  • Running amps: 4
  • Duty: Continuous
  • Motor insulation: Class F
  • Overhead protection: Built-In Thermal Automatic Reset
  • Discharge Type: Top
  • Discharge capacity: 40 gpm
  • Max. head (feet): 23
  • Port diameter ( inches): 1.25 FNPT
  • Maximum pressure: 10 psi
  • Solids handling: 0.375 in.
  • Impeller: Thermo Plastic Noryl
  • Seals: Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal
  • Cord length (feet): 20
  • Cord type: Heavy-Duty 115V
  • Dimensions (WxH): 6.4 in. x 10.3 in.
  • Pump diameter: 6.4 in.
  • Dry weight: 11 lb.
  • Residential Warranty: 1 year
  • Commercial Warranty: 1 year
Accessories
  • Garden hose adaptor
  • Low Suction device
  • Fittings

Specs

Engine

Engine Type
115V electric
Engine Manufacturer
Honda
Horsepower
1/3 hp

General

Pump Style
Submersible Standard
Impeller
Thermo Plastic Noryl
Discharge Capacity
40 gpm
Discharge Port Diameter
1.25 in. FNPT
Head Lift
23 ft.
Max Pressure
10 psi
Dimensions
6.4 in. x 10.3 in.
Weight
11 lb.

Promotions



Related Products