2018 Honda Power Equipment WSP33

$229.95


WSP33

WSP33

Availability
Brochure
Year
2018
Manufacturer
Honda Power Equipment
Model
WSP33

Overview

Description

Key Features
  • 1/3 hp 115V submersible pump
  • Top discharge
  • 40 gal./min capacity
  • Lightweight durable stainless steel casing
  • Automatic non-mercury float switch
  • Rated for continuous use
Features
  • 1/3hp, 115V submersible pump: 115 Volt operation allows the pump to be plugged into a standard outlet. (GFCI is recommended).
  • Ideal for draining basements, window wells, garden irrigation, decorative fountains and more
  • 40 gal./min capacity
  • Rated for continuous use: Operates on continuous duty in temperatures of up to 104°, and intermittent duty up to 140°. Since this pump can be used 7 days a week, 24 hours a day, it is suitable for any application that needs to move water from one place to another on a continuous basis.
  • Solids handling up to 3/8": Move slurry and dirty liquids without the worry of damaging the pump.
  • Lightweight durable stainless steel casing: The pump won't rust or corrode, minimizing costly repairs and replacement. The 304 stainless steel is an industrial grade, again minimizing damage and reducing the need for repairs.
  • Automatic non-mercury float switch: Honda submersible pumps use a mechanical float switch instead of mercury, eliminating the use of hazardous materials in the pump.
  • Built in thermal reset switch: If the pump overheats, it automatically resets itself after the pump cools down. This is designed to protect the motor from periodic overheating.
  • 20 foot heavy duty cord
  • Top discharge: Great for applications where space is tight.
  • Operates fully or partially submerged: No need to worry about the water level for the pump!
  • Shielded ball bearings for added durability: Shielded ball bearings, both top and bottom, add significantly to the longevity of the pump.
  • Efficient air-insulated motor
  • Oil lubricated double mechanical seals: Oil lubricated double mechanical seals prevent damage to the seal if the pump is run dry.
Specifications
  • Pump Type: Submersible Standard
  • Starting Type: Automatic
  • Casing: Stainless Steel
  • Motor (HP): 1/3
  • Voltage: 115
  • Starting amps: 10
  • Running amps: 4
  • Duty: Continuous
  • Motor insulation: Class F
  • Overhead protection: Built-In Thermal Automatic Reset
  • Discharge Type: Top
  • Discharge capacity: 40 gpm
  • Max. head (feet): 23
  • Port diameter ( inches): 1.25 FNPT
  • Maximum pressure: 10 psi
  • Solids handling: 0.375 in.
  • Impeller: Thermo Plastic Noryl
  • Seals: Single Carbon/Ceramic lower mechanical seal, rubber single lip upper seal
  • Cord length (feet): 20
  • Cord type: Heavy-Duty 115V
  • Dimensions (WxH): 6.4 in. x 10.3 in.
  • Pump diameter: 6.4 in.
  • Dry weight: 11 lb.
  • Residential Warranty: 1 year
  • Commercial Warranty: 1 year
Accessories
  • Garden hose adaptor
  • Low Suction device
  • Fittings

Specs

Engine

Horsepower
1/3 hp

General

Pump Style
Submersible Standard
Impeller
Thermo Plastic Noryl
Discharge Capacity
40 gpm
Discharge Port Diameter
1.25 in. FNPT
Head Lift
23 ft.
Max Pressure
10 psi
Weight
11 lb.

Related Products