Category: Bike Handle Trimmers
Primary Use: Commercial
Power Type: Gas
Adaptable for trimming, clearing brush, and even small trees.
The HHT35SUKA is ideal for the professional whose needs range from regular trimming to clearing heavy brush, saplings, and small trees.
Easy starting, 4-stroke Honda engine
The Honda Quick Start system offers a quick, easy start. No hassle. No fuss. Every time.
Runs on regular gas - no mixing!
Honda's GX35 mini 4-stroke engine runs on straight, unleaded gas. No need to mix gas and oil!
Quick acceleration and excellent torque for demanding jobs
Designed to take on thick grass and heavy brush without bogging down. Strong low-end torque characteristics allow many jobs to be performed at partial throttle, increasing fuel efficiency.
Fuel efficient design
Highly fuel efficient design costs less to operate - up to 50% less than a two-stroke trimmer!
Commercial "bike" handle design
The U shaped handle design makes the HHT35SUKA more comfortable to operate, and offers precise control.
Durable flex shaft with limited lifetime warranty
Flex shaft with limited lifetime warranty for increased durability and superior shock absorption
Deflector designed to provide increased operator visibility
Equipped with an automatic line cutter.
Solid trigger design for increased durability
17" Kwik Loader 2 line head, with Ultra Quiet® Line
Ultra Quiet® Line significantly reduces the trimmer's noise level.
10" saw blade included
Less smoke and odor
4-strokes don't burn oil like a two-stroke engine. Which means there's less smell and no smoke - and less headache for you.
Ergonomically designed and positioned controls
Balance and maneuverability are superb due to the optimization of the engine’s center of gravity, as well as the location of the throttle assembly and loop handle.
Lower vibration for more comfortable operation
The GX35 creates less vibration than comparable engines. An advanced anti-vibration system is designed into the engine clutch housing to further minimize operator fatigue.
Use and store in any position
Unique 360 degree inclinable engine can be used and stored in any position.
Double harness included
Can accommodate a variety of 9" and 10" cutting blades
|2.18 cu. in. (35.8cc)
|Unleaded Gasoline (86 Octane or higher)
|Fuel Tank Capacity
|22.0 fl oz.
|Diaphragm Type w/Fuel Pump
|3,100 +/- 200 rpm
|Max.(no load) RPM
|10,000 rpm (without cutting head)
|75.0 in. x 23.6 in. x 15.9 in.
|15.4 lb. (w/o head) 16.1 lb (with head)
|Engine Stop Switch
|Slide Type Switch
|Two Motion Trigger
|Main Pipe Diameter
|1.0 in. (25.4mm)
|Main Pipe Thickness
|.06 in. (Aluminum)
|Flexible Steel Cable
|Nylon Support Sleeve
|Kwik Loader 2 Line Head
|10 in. Brush Blade
|Blade Barrier Kit